Wall Bracket for TiFi Hestia Overhead
15.00 €
Final price (no VAT added)
TiFi Hestia Overhead speakers wall bracket. Dimensions: Height: 108 mm, width at the wall: 88 mm, under the speaker: 106 mm, and extends from the wall: 137 mm. It is fixed to the wall with two screws, with a vertical distance of 60 mm. The screws with a maximum diameter of 4.2 mm should have countersunk heads and a maximum head diameter of 11 mm. Both the wall and speaker planes are partially softened with Velcro loop tape. The speaker direction can be adjusted horizontally without limits. It allows adjusting the vertical angle of the speaker for TiFi Hestia Overhead upwards 25 degrees and downwards 20 degrees. If more vertical angle adjustment is needed, it can be printed without limiting center pin.
3D-printed speaker bracket allows for color customization. The default choice is black, incurring no additional production time or cost. Color customization does not change the color of speakers. When selecting a color, it's important to note that while the color code on the website corresponds to the material color code, the perceived color of the finished product depends on various factors and may differ from expectations. Additional charges for color selection are not refundable if the product is returned.
The speaker's bracket is 3D-printed using food-grade plastic. It can be used in all living spaces. With a small ecological footprint, the production process generates minimal waste.
o-wall-01
Comments (0)
TiFi Hestia Overhead speakers wall bracket. Dimensions: Height: 108 mm, width at the wall: 88 mm, under the speaker: 106 mm, and extends from the wall: 137 mm. It is fixed to the wall with two screws, with a vertical distance of 60 mm. The screws with a maximum diameter of 4.2 mm should have countersunk heads and a maximum head diameter of 11 mm. Both the wall and speaker planes are partially softened with Velcro loop tape. The speaker direction can be adjusted horizontally without limits. It allows adjusting the vertical angle of the speaker for TiFi Hestia Overhead upwards 25 degrees and downwards 20 degrees. If more vertical angle adjustment is needed, it can be printed without limiting center pin.
3D-printed speaker bracket allows for color customization. The default choice is black, incurring no additional production time or cost. Color customization does not change the color of speakers. When selecting a color, it's important to note that while the color code on the website corresponds to the material color code, the perceived color of the finished product depends on various factors and may differ from expectations. Additional charges for color selection are not refundable if the product is returned.
The speaker's bracket is 3D-printed using food-grade plastic. It can be used in all living spaces. With a small ecological footprint, the production process generates minimal waste.